Main Page Windows 8 DLLs Windows 10 DLLs Feedback NirSoft Utilities
Windows 7 DLL File Information - fwcfg.dll

The following DLL report was generated by automatic DLL script that scanned and loaded all DLL files in the system32 directory of Windows 7, extracted the information from them, and then saved it into HTML reports. If you want to view a report of another DLL, go to the main page of this Web site.

 

General Information

File Description: Windows Firewall Configuration Helper  
File Version: 6.1.7100.0 (winmain_win7rc.090421-1700)  
Company: Microsoft Corporation  
Product Name: Microsoft Windows Operating System  
DLL popularity Very Low - There is no any other DLL in system32 directory that is statically linked to this file.
File Size: 56 KB
Total Number of Exported Functions: 1
Total Number of Exported Functions With Names: 1
 

Section Headers

Name Virtual Address Raw Data Size % of File Characteristics Section Contains...
.text 0x00001000 50,176 Bytes 86.7% Read, Execute Code
.data 0x0000e000 1,024 Bytes 1.8% Write, Read Initialized Data
.rsrc 0x0000f000 1,536 Bytes 2.7% Read Initialized Data
.reloc 0x00010000 4,096 Bytes 7.1% Read, Discardable Initialized Data
 

Static Linking

fwcfg.dll is statically linked to the following files:

msvcrt.dll
ntdll.dll
KERNEL32.dll
ADVAPI32.dll
FirewallAPI.dll
NETSH.EXE
ole32.dll
OLEAUT32.dll
USER32.dll

This means that when fwcfg.dll is loaded, the above files are automatically loaded too. If one of these files is corrupted or missing, fwcfg.dll won't be loaded.

 

General Resources Information

Resource Type Number of Items Total Size % of File
Icons 0 0 Bytes 0.0%
Animated Icons 0 0 Bytes 0.0%
Cursors 0 0 Bytes 0.0%
Animated Cursors 0 0 Bytes 0.0%
Bitmaps 0 0 Bytes 0.0%
AVI Files 0 0 Bytes 0.0%
Dialog-Boxes 0 0 Bytes 0.0%
HTML Related Files 0 0 Bytes 0.0%
Menus 0 0 Bytes 0.0%
Strings 123 63,424 Bytes 109.6%
Type Libraries 0 0 Bytes 0.0%
Manifest 0 0 Bytes 0.0%
All Others 2 1,132 Bytes 2.0%
Total 125 64,556 Bytes 111.6%
 

Icons in this file

No icons found in this file

 

Cursors in this file

No cursors found in this file

 

Dialog-boxes list (up to 200 dialogs)

No dialog resources in this file.

 

String resources in this dll (up to 200 strings)

String ID String Text
4000 Adds firewall configuration.
4001 Deletes firewall configuration.
4002 Sets firewall configuration.
4003 Shows firewall configuration.
4009 Disable
4010 Domain
4011 Enable
4012 IPv4
4013 IPv6
4014 Legacy Firewall (ICF)
4016 None
4017 Remote Administration
4019 Standard
4023 Unspecified
4024 Windows Firewall
4026 Public
4030 Adds firewall allowed program configuration.
4031 %1!s! [ program = ] path [ name = ] name [ [ mode = ] ENABLE|DISABLE [ scope = ] ALL|SUBNET|CUSTOM [ addresses = ] addresses [ profile = ] CURRENT|DOMAIN|STANDARD|ALL ] Adds firewall allowed program configuration. Parameters: program - Program path and file name. name - Program name. mode - Program mode (optional). ENABLE - Allow through firewall (default). DISABLE - Do not allow through firewall. scope - Program scope (optional). ALL - Allow all traffic through firewall (default). SUBNET - Allow only local network (subnet) traffic through firewall. CUSTOM - Allow only specified traffic through firewall. addresses - Custom scope addresses (optional). This comma-separated scope can contain IPv4 addresses, IPv6 addresses, subnets, ranges, or the keyword LocalSubnet. profile - Configuration profile (optional). CURRENT - Applies to the active profile. Active profile can be domain, standard (i.e. private), or public. (default). DOMAIN - Applies to the domain profile. STANDARD - Applies to the standard (i.e. private) profile. ALL - Applies to the domain and standard (i.e. private) profile. Does not apply to the public profile. Remarks: 'scope' must be 'CUSTOM' to specify 'addresses'. addresses can not contain Unspecified or Loopback addresses. Examples: %1!s! C:\MyApp\MyApp.exe "My Application" ENABLE %1!s! C:\MyApp\MyApp.exe "My Application" ENABLE CUSTOM 157.60.0.1,172.16.0.0/16,10.0.0.0/255.0.0.0, 12AB:0000:0000:CD30::/60,LocalSubnet %1!s! program=C:\MyApp\MyApp.exe name="My Application" mode=DISABLE %1!s! program=C:\MyApp\MyApp.exe name="My Application" mode=ENABLE scope=CUSTOM addresses=157.60.0.1, 172.16.0.0/16,10.0.0.0/255.0.0.0, 12AB:0000:0000:CD30::/60,LocalSubnet IMPORTANT: "netsh firewall" is deprecated; use "netsh advfirewall firewall" instead. For more information on using "netsh advfirewall firewall" commands instead of "netsh firewall", see KB article 947709 at http://go.microsoft.com/fwlink/?linkid=121488 .
4032 Deletes firewall allowed program configuration.
4033 %1!s! [ program = ] path [ [ profile = ] CURRENT|DOMAIN|STANDARD|ALL ] Deletes firewall allowed program configuration. Parameters: program - Program path and file name. profile - Configuration profile (optional). CURRENT - Applies to the active profile. Active profile can be domain, standard (i.e. private), or public. (default). DOMAIN - Applies to the domain profile. STANDARD - Applies to the standard (i.e. private) profile. ALL - Applies to the domain and standard (i.e. private) profile. Does not apply to the public profile. Examples: %1!s! C:\MyApp\MyApp.exe %1!s! program=C:\MyApp\MyApp.exe IMPORTANT: "netsh firewall" is deprecated; use "netsh advfirewall firewall" instead. For more information on using "netsh advfirewall firewall" commands instead of "netsh firewall", see KB article 947709 at http://go.microsoft.com/fwlink/?linkid=121488 .
4034 Sets firewall allowed program configuration.
4035 %1!s! [ program = ] path [ [ name = ] name [ mode = ] ENABLE|DISABLE [ scope = ] ALL|SUBNET|CUSTOM [ addresses = ] addresses [ profile = ] CURRENT|DOMAIN|STANDARD|ALL ] Sets firewall allowed program configuration. Parameters: program - Program path and file name. name - Program name (optional). mode - Program mode (optional). ENABLE - Allow through firewall (default). DISABLE - Do not allow through firewall. scope - Program scope (optional). ALL - Allow all traffic through firewall (default). SUBNET - Allow only local network (subnet) traffic through firewall. CUSTOM - Allow only specified traffic through firewall. addresses - Custom scope addresses (optional). This comma-separated scope can contain IPv4 addresses, IPv6 addresses, subnets, ranges, or the keyword LocalSubnet. profile - Configuration profile (optional). CURRENT - Applies to the active profile. Active profile can be domain, standard (i.e. private), or public. (default). DOMAIN - Applies to the domain profile. STANDARD - Applies to the standard (i.e. private) profile. ALL - Applies to the domain and standard (i.e. private) profile. Does not apply to the public profile. Remarks: 'scope' must be 'CUSTOM' to specify 'addresses'. addresses can not contain Unspecified or Loopback addresses. Examples: %1!s! C:\MyApp\MyApp.exe "My Application" DISABLE %1!s! C:\MyApp\MyApp.exe "My Application" ENABLE CUSTOM 157.60.0.1,172.16.0.0/16,10.0.0.0/255.0.0.0, 12AB:0000:0000:CD30::/60,LocalSubnet %1!s! program=C:\MyApp\MyApp.exe name="My Application" mode=DISABLE %1!s! program=C:\MyApp\MyApp.exe name="My Application" mode=ENABLE scope=CUSTOM addresses=157.60.0.1, 172.16.0.0/16,10.0.0.0/255.0.0.0, 12AB:0000:0000:CD30::/60,LocalSubnet IMPORTANT: "netsh firewall" is deprecated; use "netsh advfirewall firewall" instead. For more information on using "netsh advfirewall firewall" commands instead of "netsh firewall", see KB article 947709 at http://go.microsoft.com/fwlink/?linkid=121488 .
4036 Shows firewall allowed program configuration.
4037 %1!s! [ [ verbose = ] DISABLE|ENABLE ] Shows firewall allowed program configuration. Parameters: verbose - Verbose mode (optional). DISABLE - Display only summary information (default). ENABLE - Display all available information. Examples: %1!s! %1!s! ENABLE %1!s! verbose=ENABLE IMPORTANT: "netsh firewall" is deprecated; use "netsh advfirewall firewall" instead. For more information on using "netsh advfirewall firewall" commands instead of "netsh firewall", see KB article 947709 at http://go.microsoft.com/fwlink/?linkid=121488 .
4040 %1!-7.7s! %2!-20.20s! %3!s! / %4!s!
4041 %1!-7.7s! %2!-20.20s! %3!s! / %4!s! Scope: %5!s!
4042 Allowed programs configuration for %1!s! profile: Mode Traffic direction Name / Program -------------------------------------------------------------------
4062 Shows firewall configuration.
4063 %1!s! [ [ verbose = ] DISABLE|ENABLE ] Shows firewall configuration. Parameters: verbose - Verbose mode (optional). DISABLE - Display only summary information (default). ENABLE - Display all available information. Examples: %1!s! %1!s! ENABLE %1!s! verbose=ENABLE IMPORTANT: "netsh firewall" is deprecated; use "netsh advfirewall firewall" instead. For more information on using "netsh advfirewall firewall" commands instead of "netsh firewall", see KB article 947709 at http://go.microsoft.com/fwlink/?linkid=121488 .
4080 Shows current firewall profile.
4081 %1!s! Shows current firewall profile. IMPORTANT: "netsh firewall" is deprecated; use "netsh advfirewall firewall" instead. For more information on using "netsh advfirewall firewall" commands instead of "netsh firewall", see KB article 947709 at http://go.microsoft.com/fwlink/?linkid=121488 .
4100 %1!s! profile configuration: -------------------------------------------------------------------
4101 %1!s! profile configuration (current): -------------------------------------------------------------------
4120 %1!-7.7s! %2!-3.3s! %3!s! / %4!s!
4121 Program exceptions: Mode Local policy Name / Program -------------------------------------------------------------------
4122 %1!-5u! %2!-3.3s! %3!-4.4s! %4!-8u! %5!-3.3s! %6!-3.3s! %7!-3.3s! %8!s! / %9!s!
4123 Ports on which programs want to receive incoming connections: Port Protocol Version PID Type Wildcarded Forced Name / Program -------------------------------------------------------------------
4124 ICMP settings for all network interfaces: Mode Type Description -------------------------------------------------------------------
4127 Log settings: -------------------------------------------------------------------
4128 %1!-5u! %2!-3.3s! %3!-3.3s! %4!-7.7s! %5!s! / %6!s!
4129 Port exceptions: Port Protocol Local policy Mode Name / Service type -------------------------------------------------------------------
4130 Firewall status: ------------------------------------------------------------------- Profile = %1!s! Operational mode = %2!s! Exception mode = %3!s! Multicast/broadcast response mode = %4!s! Notification mode = %5!s! Group policy version = %6!s! Remote admin mode = %7!s!
4131 Local exceptions allowed by group policy: ------------------------------------------------------------------- Open ports = %1!s! Allowed programs = %2!s!
4132 Service settings: Mode Customized Name -------------------------------------------------------------------
4133 Scope: %1!s!
4134 No ports are currently open on all network interfaces.
4135 %1!-5u! %2!-3.3s! %3!-4.4s! %4!s!
4136 Ports currently open on all network interfaces: Port Protocol Version Program -------------------------------------------------------------------
4160 Sets firewall ICMP configuration.
4161 %1!s! [ type = ] 2-5|8-9|11-13|17|ALL [ [ mode = ] ENABLE|DISABLE [ profile = ] CURRENT|DOMAIN|STANDARD|ALL Sets firewall ICMP configuration. Parameters: type - ICMP type. 2 - Allow outbound packet too big. 3 - Allow outbound destination unreachable. 4 - Allow outbound source quench. 5 - Allow redirect. 8 - Allow inbound echo request. 9 - Allow inbound router request. 11 - Allow outbound time exceeded. 12 - Allow outbound parameter problem. 13 - Allow inbound timestamp request. 17 - Allow inbound mask request. ALL - All types. mode - ICMP mode (optional). ENABLE - Allow through firewall (default). DISABLE - Do not allow through firewall. profile - Configuration profile (optional). CURRENT - Applies to the active profile. Active profile can be domain, standard (i.e. private), or public. (default). DOMAIN - Applies to the domain profile. STANDARD - Applies to the standard (i.e. private) profile. ALL - Applies to the domain and standard (i.e. private) profile. Does not apply to the public profile. Examples: %1!s! 8 %1!s! 8 ENABLE %1!s! type=ALL mode=DISABLE IMPORTANT: "netsh firewall" is deprecated; use "netsh advfirewall firewall" instead. For more information on using "netsh advfirewall firewall" commands instead of "netsh firewall", see KB article 947709 at http://go.microsoft.com/fwlink/?linkid=121488 .
4162 Shows firewall ICMP configuration.
4163 %1!s! [ [ verbose = ] DISABLE|ENABLE ] Shows firewall ICMP configuration. Parameters: verbose - Verbose mode (optional). DISABLE - Display only summary information (default). ENABLE - Display all available information. Examples: %1!s! %1!s! ENABLE %1!s! verbose=ENABLE IMPORTANT: "netsh firewall" is deprecated; use "netsh advfirewall firewall" instead. For more information on using "netsh advfirewall firewall" commands instead of "netsh firewall", see KB article 947709 at http://go.microsoft.com/fwlink/?linkid=121488 .
4180 %1!-7.7s! %2!s!
4181 2 Allow outbound packet too big
4182 3 Allow outbound destination unreachable
4183 4 Allow outbound source quench
4184 5 Allow redirect
4185 8 Allow inbound echo request
4186 9 Allow inbound router request
4187 11 Allow outbound time exceeded
4188 12 Allow outbound parameter problem
4189 13 Allow inbound timestamp request
4190 17 Allow inbound mask request
4191 ICMP configuration for %1!s! profile: Mode Type Description -------------------------------------------------------------------
4220 Sets firewall logging configuration.
4221 %1!s! [ [ filelocation = ] path [ maxfilesize = ] 1-32767 [ droppedpackets = ] ENABLE|DISABLE [ connections = ] ENABLE|DISABLE ] Sets firewall logging configuration. Parameters: filelocation - Log path and file name (optional). maxfilesize - Maximum log file size in kilobytes (optional). droppedpackets - Dropped packet log mode (optional). ENABLE - Log in firewall. DISABLE - Do not log in firewall. connections - Successful connection log mode (optional). ENABLE - Log in firewall. DISABLE - Do not log in firewall. Remarks: At least one parameter must be specified. Examples: %1!s! %%systemroot%%\system32\LogFiles\Firewall\pfirewall.log 4096 ENABLE %1!s! filelocation=%%systemroot%%\system32\LogFiles\Firewall\pfirewall.log maxfilesize=4096 droppedpackets=ENABLE IMPORTANT: "netsh firewall" is deprecated; use "netsh advfirewall firewall" instead. For more information on using "netsh advfirewall firewall" commands instead of "netsh firewall", see KB article 947709 at http://go.microsoft.com/fwlink/?linkid=121488 .
4222 Shows firewall logging configuration.
4223 %1!s! Shows firewall logging configuration. IMPORTANT: "netsh firewall" is deprecated; use "netsh advfirewall firewall" instead. For more information on using "netsh advfirewall firewall" commands instead of "netsh firewall", see KB article 947709 at http://go.microsoft.com/fwlink/?linkid=121488 .
4240 Log configuration: -------------------------------------------------------------------
4241 File location = %1!s! Max file size = %2!u! KB Dropped packets = %3!s! Connections = %4!s!
4245 Sets firewall multicast/broadcast response configuration.
4246 %1!s! [ mode = ] ENABLE|DISABLE [ [ profile = ] CURRENT|DOMAIN|STANDARD|ALL ] Sets firewall multicast/broadcast response configuration. Parameters: mode - Multicast/broadcast response mode. ENABLE - Allow responses to multicast/broadcast traffic through the firewall. DISABLE - Do not allow responses to multicast/broadcast traffic through the firewall. profile - Configuration profile (optional). CURRENT - Applies to the active profile. Active profile can be domain, standard (i.e. private), or public. (default). DOMAIN - Applies to the domain profile. STANDARD - Applies to the standard (i.e. private) profile. ALL - Applies to the domain and standard (i.e. private) profile. Does not apply to the public profile. Examples: %1!s! ENABLE %1!s! mode=DISABLE IMPORTANT: "netsh firewall" is deprecated; use "netsh advfirewall firewall" instead. For more information on using "netsh advfirewall firewall" commands instead of "netsh firewall", see KB article 947709 at http://go.microsoft.com/fwlink/?linkid=121488 .
4247 Shows firewall multicast/broadcast response configuration.
4248 %1!s! Shows firewall multicast/broadcast response configuration. IMPORTANT: "netsh firewall" is deprecated; use "netsh advfirewall firewall" instead. For more information on using "netsh advfirewall firewall" commands instead of "netsh firewall", see KB article 947709 at http://go.microsoft.com/fwlink/?linkid=121488 .
4249 Multicast/broadcast response mode = %1!s!
4250 Sets firewall notification configuration.
4251 %1!s! [ mode = ] ENABLE|DISABLE [ [ profile = ] CURRENT|DOMAIN|STANDARD|ALL ] Sets firewall notification configuration. Parameters: mode - Notification mode. ENABLE - Allow pop-up notifications from firewall. DISABLE - Do not allow pop-up notifications from firewall. profile - Configuration profile (optional). CURRENT - Applies to the active profile. Active profile can be domain, standard (i.e. private), or public. (default). DOMAIN - Applies to the domain profile. STANDARD - Applies to the standard (i.e. private) profile. ALL - Applies to the domain and standard (i.e. private) profile. Does not apply to the public profile. Examples: %1!s! ENABLE %1!s! mode=DISABLE IMPORTANT: "netsh firewall" is deprecated; use "netsh advfirewall firewall" instead. For more information on using "netsh advfirewall firewall" commands instead of "netsh firewall", see KB article 947709 at http://go.microsoft.com/fwlink/?linkid=121488 .
4252 Shows firewall notification configuration.
4253 %1!s! Shows firewall notification configuration. IMPORTANT: "netsh firewall" is deprecated; use "netsh advfirewall firewall" instead. For more information on using "netsh advfirewall firewall" commands instead of "netsh firewall", see KB article 947709 at http://go.microsoft.com/fwlink/?linkid=121488 .
4255 Notification mode = %1!s!
4260 Sets firewall operational configuration.
4261 %1!s! [ mode = ] ENABLE|DISABLE [ [ exceptions = ] ENABLE|DISABLE [ profile = ] CURRENT|DOMAIN|STANDARD|ALL Sets firewall operational configuration. Parameters: mode - Operational mode. ENABLE - Enable firewall. DISABLE - Disable firewall. exceptions - Exception mode (optional). ENABLE - Allow through firewall (default). DISABLE - Do not allow through firewall. profile - Configuration profile (optional). CURRENT - Applies to the active profile. Active profile can be domain, standard (i.e. private), or public. (default). DOMAIN - Applies to the domain profile. STANDARD - Applies to the standard (i.e. private) profile. ALL - Applies to the domain and standard (i.e. private) profile. Does not apply to the public profile. Examples: %1!s! ENABLE %1!s! mode=ENABLE exceptions=DISABLE IMPORTANT: "netsh firewall" is deprecated; use "netsh advfirewall firewall" instead. For more information on using "netsh advfirewall firewall" commands instead of "netsh firewall", see KB article 947709 at http://go.microsoft.com/fwlink/?linkid=121488 .
4262 Shows firewall operational configuration.
4263 %1!s! Shows firewall operational configuration. IMPORTANT: "netsh firewall" is deprecated; use "netsh advfirewall firewall" instead. For more information on using "netsh advfirewall firewall" commands instead of "netsh firewall", see KB article 947709 at http://go.microsoft.com/fwlink/?linkid=121488 .
4280 Operational mode = %1!s!
4281 Exception mode = %1!s!
4300 Adds firewall port configuration.
4301 %1!s! [ protocol = ] TCP|UDP|ALL [ port = ] 1-65535 [ name = ] name [ [ mode = ] ENABLE|DISABLE [ scope = ] ALL|SUBNET|CUSTOM [ addresses = ] addresses [ profile = ] CURRENT|DOMAIN|STANDARD|ALL Adds firewall port configuration. Parameters: protocol - Port protocol. TCP - Transmission Control Protocol (TCP). UDP - User Datagram Protocol (UDP). ALL - All protocols. port - Port number. name - Port name. mode - Port mode (optional). ENABLE - Allow through firewall (default). DISABLE - Do not allow through firewall. scope - Port scope (optional). ALL - Allow all traffic through firewall (default). SUBNET - Allow only local network (subnet) traffic through firewall. CUSTOM - Allow only specified traffic through firewall. addresses - Custom scope addresses (optional). This comma-separated scope can contain IPv4 addresses, IPv6 addresses, subnets, ranges, or the keyword LocalSubnet. profile - Configuration profile (optional). CURRENT - Applies to the active profile. Active profile can be domain, standard (i.e. private), or public. (default). DOMAIN - Applies to the domain profile. STANDARD - Applies to the standard (i.e. private) profile. ALL - Applies to the domain and standard (i.e. private) profile. Does not apply to the public profile. Remarks: 'scope' must be 'CUSTOM' to specify 'addresses'. addresses can not contain unspecified or loopback addresses. Examples: %1!s! TCP 80 "My Web Port" %1!s! UDP 500 IKE ENABLE ALL %1!s! ALL 53 DNS ENABLE CUSTOM 157.60.0.1,172.16.0.0/16,10.0.0.0/255.0.0.0, 12AB:0000:0000:CD30::/60,LocalSubnet %1!s! protocol=ALL port=53 name=DNS mode=ENABLE scope=CUSTOM addresses=157.60.0.1,172.16.0.0/16,10.0.0.0/255.0.0.0, 12AB:0000:0000:CD30::/60,LocalSubnet IMPORTANT: "netsh firewall" is deprecated; use "netsh advfirewall firewall" instead. For more information on using "netsh advfirewall firewall" commands instead of "netsh firewall", see KB article 947709 at http://go.microsoft.com/fwlink/?linkid=121488 .
4302 Deletes firewall port configuration.
4303 %1!s! [ protocol = ] TCP|UDP|ALL [ port = ] 1-65535 [ [ profile = ] CURRENT|DOMAIN|STANDARD|ALL Deletes firewall port configuration. Parameters: protocol - Port protocol. TCP - Transmission Control Protocol (TCP). UDP - User Datagram Protocol (UDP). ALL - All protocols. port - Port number. profile - Configuration profile (optional). CURRENT - Applies to the active profile. Active profile can be domain, standard (i.e. private), or public. (default). DOMAIN - Applies to the domain profile. STANDARD - Applies to the standard (i.e. private) profile. ALL - Applies to the domain and standard (i.e. private) profile. Does not apply to the public profile. Examples: %1!s! TCP 80 %1!s! protocol=UDP port=500 IMPORTANT: "netsh firewall" is deprecated; use "netsh advfirewall firewall" instead. For more information on using "netsh advfirewall firewall" commands instead of "netsh firewall", see KB article 947709 at http://go.microsoft.com/fwlink/?linkid=121488 .
4304 Sets firewall port configuration.
4305 %1!s! [ protocol = ] TCP|UDP|ALL [ port = ] 1-65535 [ [ name = ] name [ mode = ] ENABLE|DISABLE [ scope = ] ALL|SUBNET|CUSTOM [ addresses = ] addresses [ profile = ] CURRENT|DOMAIN|STANDARD|ALL Sets firewall port configuration. Parameters: protocol - Port protocol. TCP - Transmission Control Protocol (TCP). UDP - User Datagram Protocol (UDP). ALL - All protocols. port - Port number. name - Port name (optional). mode - Port mode (optional). ENABLE - Allow through firewall (default). DISABLE - Do not allow through firewall. scope - Port scope (optional). ALL - Allow all traffic through firewall (default). SUBNET - Allow only local network (subnet) traffic through firewall. CUSTOM - Allow only specified traffic through firewall. addresses - Custom scope addresses (optional). This comma-separated scope can contain IPv4 addresses, IPv6 addresses, subnets, ranges, and the keyword LocalSubnet. profile - Configuration profile (optional). CURRENT - Applies to the active profile. Active profile can be domain, standard (i.e. private), or public. (default). DOMAIN - Applies to the domain profile. STANDARD - Applies to the standard (i.e. private) profile. ALL - Applies to the domain and standard (i.e. private) profile. Does not apply to the public profile. Remarks: 'scope' must be 'CUSTOM' to specify 'addresses'. addresses can not contain unspecified or loopback addresses. Examples: %1!s! TCP 80 "My Web Port" %1!s! UDP 500 IKE ENABLE ALL %1!s! ALL 53 DNS ENABLE CUSTOM 157.60.0.1,172.16.0.0/16,10.0.0.0/255.0.0.0, 12AB:0000:0000:CD30::/60,LocalSubnet %1!s! protocol=ALL port=53 name=DNS mode=ENABLE scope=CUSTOM addresses=157.60.0.1,172.16.0.0/16,10.0.0.0/255.0.0.0, 12AB:0000:0000:CD30::/60,LocalSubnet IMPORTANT: "netsh firewall" is deprecated; use "netsh advfirewall firewall" instead. For more information on using "netsh advfirewall firewall" commands instead of "netsh firewall", see KB article 947709 at http://go.microsoft.com/fwlink/?linkid=121488 .
4306 Shows firewall port configuration.
4307 %1!s! [ [ verbose = ] DISABLE|ENABLE ] Shows firewall port configuration. Parameters: verbose - Verbose mode (optional). DISABLE - Display only summary information (default). ENABLE - Display all available information. Examples: %1!s! %1!s! ENABLE %1!s! verbose=ENABLE IMPORTANT: "netsh firewall" is deprecated; use "netsh advfirewall firewall" instead. For more information on using "netsh advfirewall firewall" commands instead of "netsh firewall", see KB article 947709 at http://go.microsoft.com/fwlink/?linkid=121488 .
4320 %1!-5u! %2!-3.3s! %3!-7.7s! %4!-20.20s! %5!s!
4321 %1!-5u! %2!-3.3s! %3!-7.7s! %4!-20.20s! %5!s! Scope: %6!s!
4322 Port configuration for %1!s! profile: Port Protocol Mode Traffic direction Name -------------------------------------------------------------------
4340 Resets firewall configuration to default.
4341 %1!s! Resets firewall configuration to default. Remarks: Restoring the default settings will delete all Windows Firewall settings that you have changed. For example, if you have allowed certain programs through the firewall those programs will be blocked again. IMPORTANT: "netsh firewall" is deprecated; use "netsh advfirewall firewall" instead. For more information on using "netsh advfirewall firewall" commands instead of "netsh firewall", see KB article 947709 at http://go.microsoft.com/fwlink/?linkid=121488 .
4380 Sets firewall service configuration.
4381 %1!s! [ type = ] FILEANDPRINT|REMOTEADMIN|REMOTEDESKTOP|UPNP|ALL [ [ mode = ] ENABLE|DISABLE [ scope = ] ALL|SUBNET|CUSTOM [ addresses = ] addresses [ profile = ] CURRENT|DOMAIN|STANDARD|ALL ] Sets firewall service configuration. Parameters: type - Service type. FILEANDPRINT - File and printer sharing. REMOTEADMIN - Remote administration. REMOTEDESKTOP - Remote assistance and remote desktop. UPNP - UPnP framework. ALL - All types. mode - Service mode (optional). ENABLE - Allow through firewall (default). DISABLE - Do not allow through firewall. scope - Service scope (optional). ALL - Allow all traffic through firewall. SUBNET - Allow only local network (subnet) traffic through firewall. CUSTOM - Allow only specified traffic through firewall. addresses - Custom scope addresses (optional). This comma-separated scope can contain IPv4 addresses, IPv6 addresses, subnets, ranges, or the keyword LocalSubnet. profile - Configuration profile (optional). CURRENT - Applies to the active profile. Active profile can be domain, standard (i.e. private), or public. (default). DOMAIN - Applies to the domain profile. STANDARD - Applies to the standard (i.e. private) profile. ALL - Applies to the domain and standard (i.e. private) profile. Does not apply to the public profile. Remarks: 'scope' must be 'CUSTOM' to specify 'addresses'. addresses can not contain Unspecified or Loopback addresses. Examples: %1!s! FILEANDPRINT %1!s! REMOTEADMIN DISABLE %1!s! REMOTEDESKTOP ENABLE CUSTOM 157.60.0.1,172.16.0.0/16,10.0.0.0/255.0.0.0, 12AB:0000:0000:CD30::/60,LocalSubnet %1!s! type=UPNP %1!s! type=REMOTEADMIN mode=ENABLE scope=SUBNET %1!s! type=REMOTEDESKTOP mode=ENABLE scope=CUSTOM addresses=157.60.0.1,172.16.0.0/16,10.0.0.0/255.0.0.0, 12AB:0000:0000:CD30::/60,LocalSubnet IMPORTANT: "netsh firewall" is deprecated; use "netsh advfirewall firewall" instead. For more information on using "netsh advfirewall firewall" commands instead of "netsh firewall", see KB article 947709 at http://go.microsoft.com/fwlink/?linkid=121488 .
4382 Shows firewall service configuration.
4383 %1!s! [ [ verbose = ] DISABLE|ENABLE ] Shows firewall service configuration. Parameters: verbose - Verbose mode (optional). DISABLE - Display only summary information (default). ENABLE - Display all available information. Examples: %1!s! %1!s! ENABLE %1!s! verbose=ENABLE IMPORTANT: "netsh firewall" is deprecated; use "netsh advfirewall firewall" instead. For more information on using "netsh advfirewall firewall" commands instead of "netsh firewall", see KB article 947709 at http://go.microsoft.com/fwlink/?linkid=121488 .
4400 %1!-7.7s! %2!-3.3s! %3!s!
4401 %1!-7.7s! %2!-3.3s! %3!s! Scope: %4!s!
4402 Service configuration for %1!s! profile: Mode Customized Name -------------------------------------------------------------------
4420 Shows current firewall state.
4421 %1!s! [ [ verbose = ] DISABLE|ENABLE ] Shows current firewall state. Parameters: verbose - Verbose mode (optional). DISABLE - Display only summary information (default). ENABLE - Display all available information. Examples: %1!s! %1!s! ENABLE %1!s! verbose=ENABLE IMPORTANT: "netsh firewall" is deprecated; use "netsh advfirewall firewall" instead. For more information on using "netsh advfirewall firewall" commands instead of "netsh firewall", see KB article 947709 at http://go.microsoft.com/fwlink/?linkid=121488 .
4500 File and Printer Sharing
4501 UPnP Framework
4502 Remote Desktop
4503 Inbound
4504 Outbound
4505 Inbound/Outbound
4506 IMPORTANT: Command executed successfully. However, "netsh firewall" is deprecated; use "netsh advfirewall firewall" instead. For more information on using "netsh advfirewall firewall" commands instead of "netsh firewall", see KB article 947709 at http://go.microsoft.com/fwlink/?linkid=121488 .
4507 IMPORTANT: "netsh firewall" is deprecated; use "netsh advfirewall firewall" instead. For more information on using "netsh advfirewall firewall" commands instead of "netsh firewall", see KB article 947709 at http://go.microsoft.com/fwlink/?linkid=121488 .
 

COM Classes/Interfaces

There is no type library in this file with COM classes/interfaces information

 

Exported Functions List

The following functions are exported by this dll:
InitHelperDll

 

Imported Functions List

The following functions are imported by this dll: